Practical Waterproofing Application Training Program
Program Type: Skill Development / Applicator Training
Format: Classroom Briefing + Demonstration + Hands-on Practical Session
Target Participants: Waterproofing Applicators, Helpers, Supervisors, Contractors, Site Technicians, Skilled Workers
Program Objective:
To train applicators in correct surface preparation, safe handling of materials, proper application techniques, detailing methods, quality checks, and common mistakes to avoid during waterproofing works. Based on the uploaded substructure and superstructure waterproofing content.
________________________________________
TRAINING SCHEDULE
Session Topic
1 Introduction & Safety Briefing
2 Surface Preparation
3 Material Identification & Mixing
4 Cementitious Waterproofing Application
5 Liquid Applied Membrane Application
6 Membrane Sheet Application Demo
7 Joint / Crack Repair & Detailing
8 Quality Checks & Testing
9 Hands-on Assessment & Feedback
________________________________________
DETAILED SYLLABUS
________________________________________
Session 1 – Introduction & Safety Briefing
Topics Covered
• Importance of waterproofing
• Role of applicator in project success
• Common causes of failure due to workmanship
• PPE requirements:
o gloves
o helmet
o goggles
o mask
o safety shoes
• Safe handling of chemicals and tools
• Torch / heat application safety
Learning Outcome
Understand responsibilities and safe work practices.
________________________________________
Session 2 – Surface Preparation
Topics Covered
• Cleaning dust, laitance, oil, debris
• Removal of loose concrete
• Honeycomb repair preparation
• Crack opening and groove cutting
• Fillet preparation at corners
• Moisture condition checks
• Importance of dry / SSD substrate depending on system
Practical
• Demo of proper substrate cleaning
• Corner preparation and crack treatment
Learning Outcome
Prepare surface correctly before application.
________________________________________
Session 3 – Material Identification & Mixing
Topics Covered
• Cementitious coatings
• Primers
• Polyurethane coatings
• Membrane sheets
• Sealants
• PU injection materials
• Shelf life and storage
• Correct mixing ratio
• Pot life awareness
Practical
• Mixing 2-component material
• Correct use of measuring tools
Learning Outcome
Handle and mix materials correctly.
________________________________________
Session 4 – Cementitious Waterproofing Application
Topics Covered
• Brush application
• Roller application
• Number of coats
• Coverage rate
• Direction change between coats
• Curing requirements
Practical
• Participants apply coating on sample panel
Learning Outcome
Apply cementitious systems uniformly.
________________________________________
Session 5 – Liquid Applied Membrane Application
Topics Covered
• Primer application
• PU coating application
• Film build-up
• Wet film thickness awareness
• Recoat interval
• Protection after application
Practical
• Roller / squeegee application
• Thickness demonstration
Learning Outcome
Apply liquid membranes properly.
________________________________________
Session 6 – Membrane Sheet Application Demo
Topics Covered
• Surface readiness
• Alignment of rolls
• Overlap requirements
• Torch / self-adhesive method
• Air pocket prevention
• End lap detailing
• Termination methods
Practical
• Demonstration of roll laying and overlap treatment
Learning Outcome
Understand sheet membrane installation basics.
________________________________________
Session 7 – Joint / Crack Repair & Detailing
Topics Covered
• Pipe penetrations
• Drain outlets
• Expansion joints
• Construction joints
• PU injection basics
• Sealant application
• Reinforcement tape at cracks
Practical
• Joint sealing exercise
• Pipe collar treatment demo
Learning Outcome
Execute critical details correctly.
________________________________________
Session 8 – Quality Checks & Testing
Topics Covered
• Visual inspection
• Pinholes / missed spots
• Uniform coverage
• Thickness checks
• Flood test basics
• Protection before screed / tiles
Learning Outcome
Identify defects before handover.
________________________________________
Session 9 – Hands-on Assessment & Feedback
Candidate Tasks
• Surface prep
• Material mixing
• Apply coating
• Seal a joint
• Follow safety rules
Trainer Evaluation
• Skill
• Finish quality
• Correct method
• Safety compliance
________________________________________
COMMON MISTAKES TO BE COVERED
• Applying on dusty surface
• Wrong mixing ratio
• Excess water addition
• Thin coating application
• Improper overlaps
• Missing corner treatment
• No curing / early damage
• Poor drainage detailing
________________________________________
CERTIFICATION CRITERIA
Criteria Weightage
Attendance 20{9a9e773e367b04edc27db98e78cc69f53c2f5696237b242fce30209cd298d5ae}
Practical Skill 50{9a9e773e367b04edc27db98e78cc69f53c2f5696237b242fce30209cd298d5ae}
Safety Compliance 15{9a9e773e367b04edc27db98e78cc69f53c2f5696237b242fce30209cd298d5ae}
Final Evaluation 15{9a9e773e367b04edc27db98e78cc69f53c2f5696237b242fce30209cd298d5ae}
________________________________________
CERTIFICATE TITLE
Certified Waterproofing Applicator
________________________________________
TOOLS & MATERIALS REQUIRED
• Demo slab / wall panels
• Brushes / rollers / trowels
• Mixing buckets
• Weighing tools
• PU / cementitious materials
• Membrane roll samples
• Sealants
• PPE kits
________________________________________
FINAL OUTCOME
After training, participants will be able to:
• Prepare surfaces correctly
• Mix materials as per instructions
• Apply coatings uniformly
• Understand membrane basics
• Perform detailing works
• Follow safety standards
• Reduce workmanship failures on site